مادة الملصقات بالذوبان الساخن HM6101

وصف

Hot melt sheet label material HM6101 is a type of lamination adhesive fabric,facestock is made of coated nylon fabric which is specially used for offset printing and back side laminated with thermal-activated PE adhesive.Labels made of hot melt label tape can stick in to the labelling subject firmly while it is heated by electric iron or special machines used for activated the hot melt adhesive.

البيانات الفنية للمنتج

تطبيق المنتج

Hot melt label sheet are widely used for making labels for carpet,mattress,curtain,protective clothing,car seet,sport wear,إلخ.

خصائص المنتج

1-) التوافق الجيد في الطباعة, the facestock of hot melt label tape HM6102 is made of nylon coating fabric,compatible with both ink printing and thermal transfer printing.

2-) Eco-friendly material,both facestock and thermal-activated glue are selected from eco-friendly materials.

3-) Strong bonding,labels withstand 60 times washing and will not wash off from the shoes tougne

Product Use Steps
1. تحضير
Check the equipment: Make sure that the temperature of the hot melt adhesive labeling machine (or hot press, iron) is adjustable and stable.
– Choose a label: Choose the appropriate hot melt label (e.g., high-temperature, low-temperature) based on the material to be labeled (e.g., fabric, البلاستيك, metal).
– Clean the surface: The surface of the object should be dry, free of oil and dust, otherwise the adhesive strength will be affected.
2. Heat activation
– Set temperature: refer to the label instructions (usually 75°C~230°C), for example:
– Normal fabric: about 120°C~150°C
– Heating method:
– Labeling machine: automatic label feeding and heating and pressing (suitable for mass production).
– Iron/heat press: Place the label on the object, cover it with a heat-resistant cloth (such as a silicone pad), and press it with an iron for 10~30 seconds (adjust according to the thickness of the label).
– Heat gun: Evenly heat the back of the label until the adhesive layer melts (avoid local overheating).
3. Pressing and cooling
– Uniform pressure: Flatten with a roller or hand immediately after heating to expel air bubbles.
– Natural cooling: After the adhesive layer solidifies (about 5~10 seconds), a firm bond can be formed to avoid immediate pulling.

2. Precautions for hot melt labels Usage

1. Temperature Control: The temperature is too low→ the glue is not completely melted and the viscosity is insufficient. – Excessive temperature → The adhesive line carbonizes or damages the label facestock.

2. Pressure Adjustment: – Hard materials (e.g. metals) need to be pressed together at high pressure for short periods of time. – Soft materials (e.g. الأقمشة) need to be deformed at low pressure for a long time.

3. Environmental Requirements: – Avoid handling in wet or low temperatures (which may result in failure of the bond line). 4. Security Protection: – Wear heat-resistant gloves during operation to prevent burns. – Maintain ventilation to avoid accumulation of volatiles in hot melt adhesives.

3. Solve common problems

Label off: Check if the temperature is up to standard, or if the surface is clean.

Adhesive line overflow: Reduces pressure or compression time.

Label wrinkling: Make sure that the object to be applied is flat and evenly applied when pressed.

معلومات إضافية